Designed for safety and electrical protection, our Type A RCCB RCD 2P can handle up to 16A, 40A, or 63A with a 6KA electromagnetic design. With a 30ma to 300ma differential circuit breaker, trust in our expertly crafted and scientifically proven residual current circuit breaker for your circuit protection needs.

SPECIFICATIONS

Hign-concerned Chemical: None

 

Type: Earth Leakage

Origin: Mainland China

Model Number: TORD4A-63

Certification: CE

Rated voltage: 110V 230V 400V

Residual Current characteristic: A type

Rated residual operating current: 30 mA

Breaking capacity: 6KA

Model: Magnetic type

Rated frequency: 50/60Hz

Electro-mechanical endurance: More than 4000 cycles

Certification: CE CB

Choice: yes

semi_Choice: yes

 

 

 

 

 

 

 

 

 

 

 

• Tips: 30mA, 100mA, 300mA is electromagnetic type, 10mA is electronic type.10mA cannot be tested with 5V battery.

  There is a wiring diagram above the test button, please follow the it. The power supply must enter from the top and output from the bottom. The neutral line on the left and the live line on the right.

   

  The default rated voltage of the product is 230V, (110V needs to be customized, please contact customer service)

   

General:

 

This isA TypeResidual Current Circuit Breaker

This isA TypeResidual Current Circuit Breaker

This isA TypeResidual Current Circuit Breaker

Residual Current Circuit Breaker is applicable to electric circuits with rated voltage 230/400V AC, frequency 50/60Hz and rated current up to 63Amp.

The RCCB provides indirect protection to the operator’s body under such condition that the exposed live parts should be connected to a proper earthing pole.The RCCB also provides protection against the fire danger caused by earth fault current due to function failure of over-current protection device.
Special tips:
1. RCCB with rated sensitivity up to 30mA could be used as supplementary protecting device in case other
protecting device fails its protection against electric shock.
2. RCCB designed for household installation and other similar application, is for non-professional operation,
and no maintenance is required.
3. RCCB provides on protection against electric shock resulted from direct contacts of both protected lines,or
leakage current between these two lines.
4. Particular devices such as surge protective devices,surge arrester etc are recommended to install at upstream line to RCCB as precaution against potential surge voltage and current occurring at its power input side.

5. Satisfying conditions and applications as mentioned above,RCCB with “ON-OFF” indicating device is considered suitable for isolation function.

 

 

• Technical Data:

Model Name	TORD4-63
Model	Magnetic type
Residual Current characteristic:	A type
Pole No:	2P 4P
Rated making and breaking capacity	630A
Rated current（A）	63A
Rated voltage	110V 220V 230V AC
Rated frequency	50/60Hz
Rated residual operating current |△(A):	0.03
Rated residual non operating current |△ no:	0.5|△ n
Rated conditional short-circuit current inc:	6kA
Rated conditional residual short-circuit current |△c:	6kA
Tripping duration:	Instantaneous tripping ≤0.1s
Residual tripping current range:	0.5||△n~|△n
Electro-mechanical endurance	≥4000 cycles
Connection capacity:	Rigid conductor 25mm⊃2;
Connection terminal	Screw terminal Pillar terminal with clamp
Fastening torque	2.0 Nm
Installation	On symmetrical DIN rail 35mm Panel mounting